1, Low COD value, wastewater treatment is easy;
2, Easy to wash, will not cause board residue;
3, Can be compatible with any manufacturer's dry film, green paint;
4, Very stable in strong alkali;
5, With easy emulsification and dispersion, can play an excellent dispersion effect, promote the improvement of operation;
6. Because it does not contain toxic substances, it will not cause adverse effects on people and machinery
|
|
R |
|
|
|
| 100% | |
| Viscosity(25℃) | 200~800mPas |
S
It can be used in the whole process of PCB production, low bubble transparent cleaning agent, electroplating and other silicon-free systems
This product is highly concentrated and can be added after dilution with methanol. Better added before foam formation . Usually, the initial concentration is 0.3 ~ 0.5ml per liter of tank solution, and the amount should be increased when the tank solution reaches saturation due to the dissolution of dry or wet film. This product can be diluted with water before use. Directions: It is better to stir the product before using in order to get the best effective
25kg/ 200kg plastic pail or 1000kg IBC tank
Room Temperature Storage(5℃-40℃), Avoid direct sun light, in case of frozen, warm the emulsion under room temperature. Avoid to heat up the emulsion directly. Shelf life is 12 months from the date of manufacture.